do not scale from this print unless otherwise specified, dimensions are in inches. tolerances are: decimals angles .xx: .01[.3] 2 .xxx: .005[.13] .xxxx: .0020[.051] tolerances do not apply to reference dimensions. .292 ref (typ) 7.42 * "c" ref this product manufactured with lead-free processing pb icd-xx-01 icd-xx-02 sub-tcf-3850-19-01-xx.xx (see table 1 for qty) icd-xx-02 icd-xx-01 length: xx.xx + "l" ref (see table 4) "b" ref (typ) "a" ref (typ) .570 14.49 ref (typ) .845 21.47 ref (typ) length: xx.xx 01% 'a' sts-01 (tighten to 1.4 - 1.7 in-lbs) (4 plcs) c1 first end second end n (see table 3) 2 1 n-1 (see table 3) sub-micd-x-xxx-xx sub-micd-x-xxx-xx 2 1 n-1 (see table 3) n (see table 3) hdrl-11 (see note 5) detail 'a' scale 2.5 : 1 length ref end option -f: screw option first end only -s: screw option second end only -b: screw option both ends -n: no caps (see fig. 3, sheet 5 for edge mount end options) (see fig. 4, sheet 5 for double vertical end options) (see fig. 5, sheet 5 for no caps options) (leave blank for standard caps both ends) -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 3) -teu: terminal, edge mount, up -ted: terminal, edge mount, down -seu: socket, edge mount, up -sed: socket, edge mount, down (see table 5 & sheet 4) -1: pin 1 to pin 1 -2: pin 1 to pin 2 -3: pin 1 to pin n-1 -4: pin 1 to pin n (see table 9, sheet 6) wiring option second end first end -xx.xx (inches) (03.75[95.3] min) (see note 2) (see note 8) length -019, -038, -057, -076, -095 (per row) no of positions micd-xxx-xx.xx-xxx-xxx-x-x -ttr: terminal, top, right -ttl: terminal, top, left -tbr: terminal, bottom, right -tbl: terminal, bottom, left -str: socket, top, right -stl: socket, top, left -sbr: socket, bottom, right -sbl: socket, bottom, left (see table 1 & sheet 2) -teu: terminal, edge mount, up -ted: terminal, edge mount, down -seu: socket, edge mount, up -sed: socket, edge mount, down (see table 5 & sheet 4) c fig. 1 c3 c2 vertical (micd-038-xx.xx-str-str-1 shown) * -dv end options only g sheet of 0.635 high-speed coax cable assembly by: micd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 12/11/03 6 1 sheet scale: 1.25:1 f:\dwg\misc\mktg\micd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw notes: 1. represents a critical dimension. 2. sub-tcf length is equal to micd length. 3. all assemblies to be 100% electrically tested. 4. all assemblies to be 100% hi-pot tested at 300v. 5. top sub-tcf not shown in this view for clarity; hdrl-11 to be centered on lower sub-tcf as shown; hdrl-11 is to contain part number, shop number, & date code. 6. for sub-assembly and finished good packaging requirements, reference packaging standard co-hd-wi-3033-m. 7. parts to be processed per samtec acceptability requirements: hdr-pi-01 "cable assembly workmanship standards". 8. cable lengths longer than 40.00 inches are not supported by s.i. test data. 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322 revision g
-ttr t1 t19 1 2 n n-1 t b -ttl 1 2 t19 t1 n n-1 b t n n-1 b1 b19 1 2 1 2 b1 b19 n n-1 -tbr b t -tbl b t -str 2 1 t19 t1 n-1 n b t -stl n-1 n t19 t1 2 1 b t 2 1 b1 b19 n-1 n n-1 n b1 b19 2 1 -sbr b t -sbl b t first end - vertical (see table 9, sheet 6) g g g g sheet of 0.635 high-speed coax cable assembly by: micd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 12/11/03 6 2 sheet scale: 1.25:1 revision g f:\dwg\misc\mktg\micd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
-ttr t1 t19 n-1 n 1 2 t b b19 b1 1 2 n-1 n -tbr t b -ttl t1 t19 n n-1 2 1 t b b1 b19 n n-1 2 1 -tbl t b -str t1 t19 n-1 n 1 2 t b b19 b1 n-1 n 1 2 -sbr t b -stl t1 t19 2 1 n n-1 t b 2 b19 b1 1 n n-1 -sbl t b second end - vertical (see table 9, sheet 6) sheet of 0.635 high-speed coax cable assembly by: micd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 12/11/03 6 3 sheet scale: 1.25:1 f:\dwg\misc\mktg\micd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw revision g 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
t19 t1 1 2 n n-1 -teu t b b1 b19 b t 1 2 n n-1 -ted t1 t19 1 2 n n-1 -teu b t b19 b1 1 2 n n-1 -ted t b t19 t1 n-1 n 2 1 -seu t b b1 b19 b t n-1 n 2 1 -sed t1 t19 n-1 n 2 1 -seu b t b19 b1 n-1 n 2 1 -sed t b length: xx.xx + "l" ref (see table 4, sheet 1) "d" ref 1 .292 7.42 ref sub-micd-x-xxx-03 icd-xx-03 (typ) icd-xx-01 icd-xx-02 fig. 2 edge mount (no captive panel screws) (micd-019-xx.xx-teu-stl-x shown) (same as fig. 1, unless otherwise stated) first end - edge mount (see table 9, sheet 6) second end - edge mount (see table 9, sheet 6) g g sheet of 0.635 high-speed coax cable assembly by: micd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 12/11/03 6 4 sheet scale: 1:1 f:\dwg\misc\mktg\micd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw revision g 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
"h" ref "g" ref .140 ref (typ) 3.56 .296 7.52 ref (typ) c l .220 5.59 ref "j" ref icd-xx-02-sdo icd-xx-01 "e" ref .500 12.70 ref (typ) (fully tightened) edge mount (with captive panel screws) (micd-019-xx.xx-teu-xxx-1-f shown) (same as fig. 2, unless otherwise stated) fig. 3 cps-4-40-01-x "f" ref icd-xx-03-cps (typ) (see table 9) "m" (see table 9) "n" 1 sub-micd-x-xxx-xx sub-micd-x-xxx-03 sub-tcf-3850-xx-xx-xx.xx apply uv epoxy to all cable ends (height not to exceed .050[1.27] above pcb surface) double vertical (with screw down option) (micd-019-xx.xx-ttr-xxx-1-f shown) (same as fig. 1, unless otherwise stated) fig. 4 (micd-019-xx.xx-teu-stl-x-n shown) (same as fig. 1, unless otherwise stated) fig. 5 f sheet of 0.635 high-speed coax cable assembly by: micd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 12/11/03 6 5 sheet scale: 1.25:1 f:\dwg\misc\mktg\micd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw revision g 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
sheet of 0.635 high-speed coax cable assembly by: micd-xxx-xx.xx-xxx-xxx-x-x dwg. no. description: proprietary note this document contains information confidential and proprietary to samtec, inc. and shall not be reproduced or transferred to other documents or disclosed to others or used for any purpose other than that which it was obtained without the expressed written consent of samtec, inc. do not scale drawing kevin b 12/11/03 6 6 sheet scale: 1.25:1 f:\dwg\misc\mktg\micd-xxx-xx.xx-xxx-xxx-x-x-mkt.slddrw revision g 520 park east blvd, new albany, in 47150 phone: 812-944-6733 fax: 812-948-5047 e-mail: info@samtec.com code: 55322
|
